I have a cm2250, what specialty tools would I need to replace this seal? Also what parts would I also need besides the seal?
I've done them on series 60s and I thought they were a fairly easy to do.
(02-13-2017 )joed2323 Wrote: [ -> ]I have a cm2250, what specialty tools would I need to replace this seal? Also what parts would I also need besides the seal?
I've done them on series 60s and I thought they were a fairly easy to do.
cummins quickserve best place to find answers. It's free just register engine serial #
My mechanic says they are very easy to screw up which is why he always has a spare.
(02-13-2017 )joed2323 Wrote: [ -> ]I have a cm2250, what specialty tools would I need to replace this seal? Also what parts would I also need besides the seal?
I've done them on series 60s and I thought they were a fairly easy to do.
You
need tool part
#3162992 Front Crank Seal Remover/Installer to do this procedure with the best chance of success.
The procedure is in Quickserve->ISX Service Manual->Section 1 Cylinder Block->10-001-023 Crankshaft Seal, Front