I get a little stumble sometimes at idle and figured why not run the test, I've done the leak down and that was well within spec. I got the results though from the performance test and wanted to know what the heck the convergence thing is about. Thanks.
It might be a good idea to do a cylinder cutout test. rawze has a video on the details, running engine on one cylinder at a time.
(02-23-2018 )hhow55 Wrote: [ -> ]It might be a good idea to do a cylinder cutout test. rawze has a video on the details, running engine on one cylinder at a time.
Already did that, seemed like they were all ok, as well I did the actuator test too and that seemed to do just fine.