Rawze.com: Rawze's ISX Technical Discussion and more

Full Version: Pin the Motor to replace air compressor

You're currently viewing a stripped down version of our content. View the full version with proper formatting.

When I bar the motor and get the damper lined up with the "Pin" mark, does it matter in regards to TDC to install the compressor? Or, just make sure that I bar to the "pin" mark and disregard TDC like when doing the overhead?

just the "pin" position.

Reference URL's

Rawze.com: Rawze's ISX Technical Discussion and more: http://rawze.com/forums/index.php
:

Rawze.com: Rawze's ISX Technical Discussion and more

Waterloo

Rawze