04-27-2016,
Hey guys, thought I would share.
This is the tool I use for pulling injectors.
I like it because it's adjustable pivot end
.I bought it at Napa in a 3 piece set but can't remember the cost. Napa will break it down if you just need the one but it wasn't that expensive for all 3 so that's how I bought them.
Part number is PBF 10.
This is the tool I use for pulling injectors.
I like it because it's adjustable pivot end
.I bought it at Napa in a 3 piece set but can't remember the cost. Napa will break it down if you just need the one but it wasn't that expensive for all 3 so that's how I bought them.
Part number is PBF 10.