Rawze.com: Rawze's ISX Technical Discussion and more

[attachment=5786]

I am trying to find connector's for making my own wiring harness. Would anyone know of a good source.

TIA

I have a Grote kit at the shop, it’s for Weatherpack fittings, I think two, three and four pin connectors

^^^^^^ yeah weatherpak connectors ^^^^^^

Amazon or DigiKey. Good crimping tool need to make reliable connectors.

This is the best one for weatherpak in my opinion

12014254 Weatherpack Crimp Tool https://amzn.to/2QoJ0VS

I crimp+solder mine. call me anal but I hate any chance for a loose or intermittent connection.

(11-16-2019 )Nilao Wrote: [ -> ]I crimp+solder mine. call me anal but I hate any chance for a loose or intermittent connection.

I solder all connections as well.

The connector on the left looks like a weather pack

I've ordered a lot of those parts from this place:

https://theelectricaldepot.com/weather-p...nals-seals

Or Waytek:

https://www.waytekwire.com/products?pSearch=weatherpack

Mouser and Jameco have them too. Price out what you want and pick which is cheapest

The connectors on the right look they were cast on. Not sure what you can do for those unless you want to replace them with weather pack connectors on the other side of the connection too

How much do you have to replace?

amazon has a lot of that stuff too, just as a comparison. I bookmarked some of the the weather-pak connectors I have found a while back, about 75% way down the bottom of the list or so...
https://www.amazon.com/shop/rawzescollection