Rawze.com: Rawze's ISX Technical Discussion and more

Hi,

I was trying to remove the AC/heater blower unit from underneath the bunk of a prostar international. It has 4-10mm screws up top. I'll need to cap the AC and heater lines. Has anyone done this ?

Thank you.

Apu truck or no apu?

No Apu.

i have never had to pull mine out yet.

I thought I'd save some storage space. I never idle the truck.

I wouldn't cap the lines. I would take it to a independent AC shop and have them fabricate the lines to just the front core...as far as the heater goes you just remove the T fittings in the front and pipe it to the front core.