+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: ISX Related Help (/forumdisplay.php?fid=68)
+--- Thread: CM870 Pull File from ECM (/showthread.php?tid=7021)
Pages: 1 2
CM870 Pull File from ECM - 2dlb - 02-08-2021
Hi Guys. I have an ECM and have borrowed a bench harness. I can hook up ok with insite and can see a list of active faults, i assume cause its not hooked up to the truck. How do i go about copying the ecm file to email it to Rawze. Any help would be great ive never done it before.
Thanks
RE: CM870 Pull File from ECM - tree98 - 02-08-2021
You need c@term to pull a copy of the program, insite won't do it.
RE: CM870 Pull File from ECM - 2dlb - 02-08-2021
thanks, i do have cterm but still wont open. as well i cant clear the codes i assume because the truck is not hooked up. or is there another file i need
RE: CM870 Pull File from ECM - tree98 - 02-08-2021
You need the right engine configuration file.
RE: CM870 Pull File from ECM - 2dlb - 02-08-2021
I found enf is that right for a 870
RE: CM870 Pull File from ECM - tree98 - 02-08-2021
Honestly I can't remember and I can't check at the moment.
RE: CM870 Pull File from ECM - Blott4 - 02-12-2021
(02-08-2021 )2dlb Wrote: I found enf is that right for a 870
Any news on this? I would also be interested in knowing how to pull a file.
RE: CM870 Pull File from ECM - Chamberpains - 02-12-2021
You need to search out and aquire calterm and the directions you seek are in what the internet knows as mama's m ilk money files.
RE: CM870 Pull File from ECM - Peashooter67 - 02-19-2023
That’s for the cm871 not a cm870 ! Will this still work for an cm870?