![]() |
Increasing HorsePower -- What You Need To Know - Printable Version +- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums) +-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1) +--- Forum: Rawze's Technical Documents (/forumdisplay.php?fid=38) +--- Thread: Increasing HorsePower -- What You Need To Know (/showthread.php?tid=1) |
RE: Increasing HorsePower -- What You Need To Know - RedBandit - 07-16-2024 I'll have a go... I have a 2009 cm871 in a T800 I recently purchased, will be overhauling the engine due to worn out cams and age. Once that's finished Looking for a stronger calibration without smart torque feature. Engine #79370257 485ST AV10241 CPL 3749 Truck has 10 speed and 3.55 gear, Engine is still equipped with and using everything it came with. RE: Increasing HorsePower -- What You Need To Know - Rawze - 07-17-2024 (07-16-2024 )RedBandit Wrote: I'll have a go... I have a 2009 cm871 in a T800 I recently purchased, will be overhauling the engine due to worn out cams and age. Once that's finished Looking for a stronger calibration without smart torque feature. Engine #79370257 485ST AV10241 CPL 3749 Truck has 10 speed and 3.55 gear, Engine is still equipped with and using everything it came with. Yours is listed in the first post of the thread here. AV10241 is simply the updated DPF version of program AV10048 (CPL2733). These are interchangeable with each other ... Code: =========================== The conversion chart for the updated CPL's and newer DPF's is listed here by the way: https://rawze.com/forums/showthread.php?tid=530&pid=4001#pid4001 I.E.> program AV10165 crosses over to program AV10248. RE: Increasing HorsePower -- What You Need To Know - RedBandit - 07-18-2024 Thanks for the help! |