+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: ISX Related Help (/forumdisplay.php?fid=68)
+--- Thread: Cm 2350 derate with spn 1209 (/showthread.php?tid=10304)
Pages: 1 2
RE: Cm 2350 derate with spn 1209 - farmtrucknw - 09-08-2025
(09-08-2025 )Rawze Wrote:(09-08-2025 )farmtrucknw Wrote:(09-08-2025 )Rawze Wrote: could be crappy delete programming?....
https://rawze.com/forums/showthread.php?tid=9934&pid=82904#pid82904
It's not deleted but it does have a power increase from 415 to 475 hp. Tuning was do e by a large tuner that I have had great luck with on JD equipment and pickups but after reading about all the bad tuning on here that may be the problem. I have to ability to put the stock file back in. It never really felt that strong anyway and I assumed most of that was because of the eaton autoshift protections and the fact it has way too tall of gearing.
what is the engine ser#?... and what is the program name that is in it now.. for all you know, the current programming might not even be compatible.
ESN 79942449 Cal file is EF10415.19
RE: Cm 2350 derate with spn 1209 - Rawze - 09-09-2025
(09-08-2025 )farmtrucknw Wrote: ...
ESN 79942449 Cal file is EF10415.19
I thought you said that someone increased HP in it. The program EF10415 is the program that belongs in it .. but is 415 HP. - Did they edit the program itsaelf?... or does it show a different program in the ecm when connecting with Insite?.
.. and if someone edited it, then you need to have it reviewed to ensure other stuffs was not done in there that should not have been.