+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: ISX Related Help (/forumdisplay.php?fid=68)
+--- Thread: cm 870 six Delta p sensor (/showthread.php?tid=117)
Pages: 1 2
RE: cm 870 six Delta p sensor - marek4792 - 03-08-2016
(03-07-2016 )Unilevers Wrote:I only did the mechanical part of the "mandate" and nothing to the ecm except had the latest calibration installed cpl 8287 500hp 1600ftlbs, sorry for not giving you enough info.(03-07-2016 )marek4792 Wrote: I have the same code as you pid411 "value too high" and/or "electrical" and I was wondering if it is also effecting boost even if the mandate blocked off?
if the mandate is properly removed, then no - that code will disappear and not effect anything.