+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: Ask Your question... (/forumdisplay.php?fid=45)
+--- Thread: Overheating (/showthread.php?tid=2051)
Pages: 1 2
RE: Overheating - donaldray - 08-22-2017
Well, in middle of no where. Two shops. One is book for 10 days and other not even interested. Freightliner shop next town over had too order part from Billing, Montana. Could not even get the bolts for it. Got it on. Put some flush in it with tap water but not city water. And notice fan clutch is a goner. And fan is slipping. Freightliner could not get the part for me. after first 50 miles.problem of overheating started again. I took a drill and drill hole through the clutch housing and put tap screw in. So far, it got me too Cheyenne, WY.
RE: Overheating - donaldray - 08-22-2017
Will fix all these problems after delivery too Dallas Thursday.
RE: Overheating - stevesparts - 08-22-2017
Well it's a good thing you didn't take it to the FL shop in three forks mt THEY SUCK!!!
you did pass a cummins shop in billings but their not that great either.motor power kw is about the same with their tec's but they would have parts for you.(fan)