+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: Ask Your question... (/forumdisplay.php?fid=45)
+--- Thread: International LONESTAR (/showthread.php?tid=6767)
Pages: 1 2
RE: International LONESTAR - Ballerxl - 11-17-2020
Thanks for the feedback guys.. A lot of drivers here have Cascadia or peterbilts around here.. I always load about 80000 lbs of sand so I’m needing a good working truck and at the same time comfortable and has some power.. as far as gear ratios do I would a 3.6 ratio work for that kind of load pulling or do I need to go higher.. I don’t drive fast down these dirt roads I go about 10 mph while guys fly right by me down bad roads.. I try to take care of what I got.. I just thought the lonestar looks good but now I’m second guessing
RE: International LONESTAR - Ballerxl - 11-17-2020
There’s also some trucks with paccar engines I seen.. what’s y’all opinions on the paccar models
RE: International LONESTAR - amermextrucker - 11-17-2020
(11-17-2020 )Ballerxl Wrote: There’s also some trucks with paccar engines I seen.. what’s y’all opinions on the paccar models
Ive heard those PACCARS have alot of sensor issues , CEL coming on and so forth. Also I believe only dealer can work on them and parts are very expensive.
RE: International LONESTAR - Rawze - 11-18-2020
as far as rears go ... 3.79's or 4.11's come to mind. 4.36's or even 4.68's come to mind if there is a lot of stop and go.
RE: International LONESTAR - Ballerxl - 11-18-2020
Yea I do a lot of stop and go most days other times I’m running 100 mile runs twice a day so I’ll keep that in mind on the ratios .. I found a small company here in west Texas who’s selling a 2010 Pete 389.. with a completely rebuilt engine and they say they have. Video and paperwork to prove it.. that’s got a Cummins in it .. there wanting 60000 for it.. so I’m going to look into that ..
RE: International LONESTAR - Lonestar10 - 11-18-2020
60k for a 2010 389...i could buy 2 of my 2016 t680s with 600k for that...plus most shops dont rebuild cummins correctly and they fall apart before they should.
RE: International LONESTAR - schISM - 11-19-2020
(11-17-2020 )amermextrucker Wrote:(11-17-2020 )Ballerxl Wrote: There’s also some trucks with paccar engines I seen.. what’s y’all opinions on the paccar models
Ive heard those PACCARS have alot of sensor issues , CEL coming on and so forth. Also I believe only dealer can work on them and parts are very expensive.
I’ve been running a PACCAR for over two years now and love it. One CEL for DEF temp. is the only issue I’ve had and it’s hands down the most fuel efficient truck I’ve owned.
RE: International LONESTAR - Rawze - 11-21-2020
(11-18-2020 )Ballerxl Wrote: Yea I do a lot of stop and go most days other times I’m running 100 mile runs twice a day so I’ll keep that in mind on the ratios .. I found a small company here in west Texas who’s selling a 2010 Pete 389.. with a completely rebuilt engine and they say they have. Video and paperwork to prove it.. that’s got a Cummins in it .. there wanting 60000 for it.. so I’m going to look into that ..
If your not doing any off-roading of rugged terrain, extra heavy haul, etc... to require such a pig of a truck, then your doing nothing but throwing money down the drain on that antique-roadshow of a truck ($8,000+ in extra fuel consumption alone per year). Not only that, but never trust a freshly inframed truck these days... most shops cannot rebuild isx worth a damned any more. ... even if i had an application for it, I wouldn't give more than 30k for that thing.