+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: ISX Related Help (/forumdisplay.php?fid=68)
+--- Thread: 2006 KW t800 isx15 CM870 power loss (/showthread.php?tid=7375)
Pages: 1 2
RE: 2006 KW t800 isx15 CM870 power loss - Waterloo - 06-01-2021
That sounds near identical to mine when it failed, and I was in the middle of a five lane street in Pontiac MI... Hit the ECM with a hammer and got her almost a mile where she failed again, in a safe parking space. Installed new ECM from the house that I had on hand, no issues since.
RE: 2006 KW t800 isx15 CM870 power loss - ahrenb - 06-02-2021
Glad to hear it. KW up the road says 2k for a new one and then 2-4 hours to flash it to my specs at $155 an hour. I ordered it and they'll get it from cummins. I need to call my rep and see if she can help me out with the price a bit. I'll keep this updated.
RE: 2006 KW t800 isx15 CM870 power loss - Waterloo - 06-02-2021
(06-02-2021 )ahrenb Wrote: Glad to hear it. KW up the road says 2k for a new one and then 2-4 hours to flash it to my specs at $155 an hour. I ordered it and they'll get it from cummins. I need to call my rep and see if she can help me out with the price a bit. I'll keep this updated.
Good, keep us informed if this solves the problem.
RE: 2006 KW t800 isx15 CM870 power loss - ahrenb - 06-14-2021
Ok, so, after new ECM was installed a little over a week ago, there hasn't been any issues. Driver is super stoked, he loves the truck because its pre-dpf system so his exhaust brake is louder than the newer trucks. smh. Drivers.
Anyways, thanks for the help with this guys!! Cheers to everyone!
-Ahren