+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: Ask Your question... (/forumdisplay.php?fid=45)
+--- Thread: Need help after programming new ecm (/showthread.php?tid=8319)
Pages: 1 2
RE: Need help after programming new ecm - Rawze - 08-22-2022
Maybe you need to pull the connectors off of the ecm and se if a pin got bent.