+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: ISX Related Help (/forumdisplay.php?fid=68)
+--- Thread: 870 0482 code, low boost (/showthread.php?tid=9895)
Pages: 1 2
RE: 870 0482 code, low boost - Rawze - 03-10-2025
(03-09-2025 )DCtruckin Wrote: ... and they said my cpl is good for a factory 550/1850 tune....
I would trust statements like that from an OEM about as far as I can throw my truck.
you need to find out exactly what program that engine sert# calls for. And you also need to find out exactly what program was shoved into your ecm.. and then have a comprehensive comparison done to ensure they are actually 100% compatible.
here is some related info: http://rawze.com/forums/showthread.php?tid=1&pid=1#pid1
what is your engine ser#?.
what program is in your ecm currently?.
RE: 870 0482 code, low boost - trucklogger2 - 03-12-2025
Has anyone looked at fueling actuators on this?
Check for wet harness on ifsm isolate front 3 cylinders and rear three etc on insite.
Very common and easy for anyone to check.
RE: 870 0482 code, low boost - DCtruckin - 05-04-2025
(03-10-2025 )Rawze Wrote:(03-09-2025 )DCtruckin Wrote: ... and they said my cpl is good for a factory 550/1850 tune....
I would trust statements like that from an OEM about as far as I can throw my truck.
you need to find out exactly what program that engine sert# calls for. And you also need to find out exactly what program was shoved into your ecm.. and then have a comprehensive comparison done to ensure they are actually 100% compatible.
here is some related info: http://rawze.com/forums/showthread.php?tid=1&pid=1#pid1
what is your engine ser#?.
what program is in your ecm currently?.
serial# is 8LB010068
currently has the factory 550/1850 file in it
RE: 870 0482 code, low boost - DCtruckin - 05-04-2025
(01-11-2025 )marek4792 Wrote:(01-11-2025 )DCtruckin Wrote:This update is within the last few months, they do fail without outright saying it's broke. Either this is your issue or your exhaust and boost pressure sensors are failing "in range".(01-10-2025 )marek4792 Wrote: The air control valve box on these are known to be garbage even Cummins redesigned them recently.
everything in the turbo system is within 2 years old, from the air line to the box, the box, stainless line to turbo, turbo, all replaced. its also a recon long block with 125k miles, pretty fresh motor
whats the part # for the upfit kit?
RE: 870 0482 code, low boost - Rawze - 05-04-2025
(05-04-2025 )DCtruckin Wrote: ...
serial# is 8LB010068
...
That is a long-block generic ser#. It is not searchable on quickserv to see what program belongs in it. - What is the CPL on the engines current data-plate.. and what is the VIN# for the vehicle?.
RE: 870 0482 code, low boost - DCtruckin - 06-08-2025
(05-04-2025 )Rawze Wrote:(05-04-2025 )DCtruckin Wrote: ...
serial# is 8LB010068
...
That is a long-block generic ser#. It is not searchable on quickserv to see what program belongs in it. - What is the CPL on the engines current data-plate.. and what is the VIN# for the vehicle?.
Yes thats just what the tag says. and the previous engine tag was gone so had no info from that.
current engine CPL is 8520
vin# 1XP-5D49X-6-5D843393
hopefully this helps. need to replace the air control valve still. Im not opposed to putting in a safer tune back into the truck. not looking for high power, looking for longevity and driveability. For some reason this is the jerkiest least smooth truck ive ever driven. And has been since before the longblock, before the tune from running rough, before the now to oem 550 tune.