+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: Ask Your question... (/forumdisplay.php?fid=45)
+--- Thread: ISX 12 code 4726 and 0559 (/showthread.php?tid=9948)
Pages: 1 2
RE: ISX 12 code 4726 and 0559 - FarmLife - 03-06-2025
I replaced the high pressure fuel pump. Mostly have the same results. Still has low rail pressure. I ran the injector leak off test and it set 2 new codes. Codes 3741 and 3727 and still has the 0559. I ran the cylinder cut off test and when I cut off #6 the rail pressure becomes almost even with actual vs commanded. I then capped off the the common rail going to #6 injector and actual vs commanded is almost even. When I take the cap off #6 and try to start the engine it will not restart and has low rail cranking pressure. Put cap back on #6 and it will restart.
Am I wrong in thinking I need to replace injector #6. I have cut off and capped all other cylinders with little to no change in actual rail pressure. I have 3 sister trucks and I am thinking to swap one injector at a time and see what happens.
RE: ISX 12 code 4726 and 0559 - FarmLife - 03-06-2025
I replaced the high pressure fuel pump. Mostly have the same results. Still has low rail pressure. I ran the injector leak off test and it set 2 new codes. Codes 3741 and 3727 and still has the 0559. I ran the cylinder cut off test and when I cut off #6 the rail pressure becomes almost even with actual vs commanded. I then capped off the the common rail going to #6 injector and actual vs commanded is almost even. When I take the cap off #6 and try to start the engine it will not restart and has low rail cranking pressure. Put cap back on #6 and it will restart.
Am I wrong in thinking I need to replace injector #6. I have cut off and capped all other cylinders with little to no change in actual rail pressure. I have 3 sister trucks and I am thinking to swap one injector at a time and see what happens.
RE: ISX 12 code 4726 and 0559 - Rawze - 03-06-2025
do an injector leak test same as this video shows...
info: http://rawze.com/forums/showthread.php?tid=8728&pid=75483#pid75483