+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: Your Daily Blog (/forumdisplay.php?fid=77)
+--- Thread: Cm570 build (/showthread.php?tid=1847)
RE: Cm570 build - AussieISX - 07-12-2017
As it sits . Need to get a couple of thermostats and plug up an engine harness and it's good to go
RE: Cm570 build - Rig Wrench - 07-12-2017
Beautiful. Real nice work. When's the transplant?
RE: Cm570 build - kryten - 07-12-2017
Sweet. Like one of your country men You Tube stars would say, "can't wait to see you kick her in the guts". The guy uses the name "Alwaysoffroad" and here is a little vid of him pulling a triple road train grossing 115 tons.
RE: Cm570 build - Hammerhead - 07-12-2017
I think I need a tissue and a moment...
Very nice! I really like the modified size c/c breather!
where's the jealous emoticon?
RE: Cm570 build - AussieISX - 07-13-2017
(07-12-2017 )Rig Wrench Wrote: Beautiful. Real nice work. When's the transplant?
Thanks, probably fit it between the rails in the next fortnight, I'm out in the truck again for s week or so tomorrow.
RE: Cm570 build - AussieISX - 07-13-2017
(07-12-2017 )Hammerhead Wrote: I think I need a tissue and a moment...
Very nice! I really like the modified size c/c breather!
where's the jealous emoticon?
Hahahaha, might look pretty but hopefully I got it right. First fire up will be a nervous time !!!
RE: Cm570 build - Nilao - 07-13-2017
(07-13-2017 )AussieISX Wrote:(07-12-2017 )Hammerhead Wrote: I think I need a tissue and a moment...
Very nice! I really like the modified size c/c breather!
where's the jealous emoticon?
Hahahaha, might look pretty but hopefully I got it right. First fire up will be a nervous time !!!
I know that first start feeling after it's reassembled. Everyone stand back. It might grenade. Lol
RE: Cm570 build - justdoug - 07-16-2017
I know proper building of the motor is of utmost importance,but I so appreciate when it looks good too. Great job!
RE: Cm570 build - AussieISX - 07-26-2017
Bit of progress the last couple of days. Should be making noise by the weekend. Fitted up a new 2050 easy pedal clutch and did a heap of re-ferb work on the harness. Re bushed the spring mounts on the chassis and painted and fitted new springs while the engine was out . Still need to strip and clean the radiator and fit new gaskets on the tanks