Rawze.com: Rawze's ISX Technical Discussion and more
Signature 600 chuffing - Printable Version

+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: ISX Related Help (/forumdisplay.php?fid=68)
+--- Thread: Signature 600 chuffing (/showthread.php?tid=4415)

Pages: 1 2 3 4


RE: Signature 600 chuffing - Creek - 07-26-2019

Pulled the boot. No popping sound. Can hear a chugging when the air compressor cuts in. That and the miss is still audible. So to me, that is good news.
Still debating the investment for insite. I probably will. I have a cheap HP laptop. Very slow most of the time. Does one need a loaded up laptop to run insite?
Where is the best place to purchase what I need? Thanks a bunch.


RE: Signature 600 chuffing - Waterloo - 07-26-2019

Here is where most of us bought ours... https://www.ebay.com/itm/INLINE-6-Data-Link-Adapter-for-Cummins-RP1210-Heavy-Duty-Diagnostic-DHL-EMS-ZX/153499143638?hash=item23bd430dd6:g:utsAAOSwme1byqF0

Does not take much to run Insite on a laptop. Software is included with the above reader.


RE: Signature 600 chuffing - Lonestar10 - 07-26-2019

Doesn't take much to run insite a brand new 300$ laptop could do it. Even though I run mine on a premium Acer predator gaming laptop


RE: Signature 600 chuffing - Chamberpains - 07-26-2019

Basically any factory laptop that can run Windows 7 will run Insite no problem. There is no need to buy anything fancy. If your HP runs Windows 7 or newer, have it fresh (clean) installed 1st. Make sure its virus and BS free.


RE: Signature 600 chuffing - Creek - 07-27-2019

My Inline 6 adapter kit is on it’s way. I believe I will have more questions down the road. Thank you all for the replies.


RE: Signature 600 chuffing - Creek - 07-27-2019

Told ya! Will I need to purchase additional software to run basic tests? Thanks


RE: Signature 600 chuffing - Waterloo - 07-27-2019

(07-27-2019 )Creek Wrote:  Told ya! Will I need to purchase additional software to run basic tests? Thanks

No, everything you need should be in the kit you just bought.


RE: Signature 600 chuffing - Creek - 07-28-2019

Super! Thanks


RE: Signature 600 chuffing - Creek - 07-31-2019

Well I got all my goodies. Inline 6 and Panasonic Toughbook dedicated to Insite. Stuck at the registration/password etc. Have searched the forums here and unclear of how to proceed. I bought the Inline 6 from Autogeek on Amazon. Is that who I contact. Or do I need to contact Cummins. I know the info is on here somewhere and I apologize in advance for not being able to find it. Thanks