+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: Ask Your question... (/forumdisplay.php?fid=45)
+--- Thread: Grinding/growling noise coming from rear end (/showthread.php?tid=10292)
RE: Grinding/growling noise coming from rear end - Redland1 - 11-23-2025
Just wanted to give an update because I had forgotten to give one. The problem ended up being the ride height like a few on here suggested. Found the IROS 40k specs online and grabbed a rod the same thickness as the one on the leveling valve at tractor supply, and cut it down till I got the right height. Thanks everyone
RE: Grinding/growling noise coming from rear end - Benjamin9669 - 12-02-2025
(11-23-2025 )Redland1 Wrote: Just wanted to give an update because I had forgotten to give one. The problem ended up being the ride height like a few on here suggested. Found the IROS 40k specs online and grabbed a rod the same thickness as the one on the leveling valve at tractor supply, and cut it down till I got the right height. Thanks everyone
I was just about to mention even if it was off a {tiny bit}, it would still sound like the rear end was going to fall out lol. Had it happen to me.