+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: Ask Your question... (/forumdisplay.php?fid=45)
+--- Thread: Regen light on (/showthread.php?tid=2509)
RE: Regen light on - Rawze - 01-01-2018
Make sure your regen inhibit switch is not inhibiting the regen cycle.
RE: Regen light on - hhow55 - 01-01-2018
[/quote]
Make sure your regen inhibit switch is not inhibiting the regen cycle.
[/quote]
Ok
RE: Regen light on - hhow55 - 01-01-2018
Just learned I need to reset ecm, as well as the cleaned can when installed. I did the ecm reset, but not the can reset.
Doing forced regen, then do reset on can. Is this correct?
RE: Regen light on - hhow55 - 01-01-2018
[attachment=3400]
RE: Regen light on - hhow55 - 01-01-2018
[attachment=3401]
RE: Regen light on - Rawze - 01-02-2018
how about fixing your crank case pressure switch. That can throw things off on some trucks because it is used as compare against the altitude sensor on some calibrations.
RE: Regen light on - hhow55 - 01-02-2018
(01-02-2018 )Rawze Wrote: how about fixing your crank case pressure switch. That can throw things off on some trucks because it is used as compare against the altitude sensor on some calibrations.
I replaced the cc pressure switch, and have had no code since then.
RE: Regen light on - hhow55 - 01-02-2018
[attachment=3403]
Thought this might help.
RE: Regen light on - hhow55 - 01-04-2018
Ok,
Went 950 miles since reset on ecm and can and the DPF light is screaming again...
Did a forced regen, and sure getting tired of this. Also have fault code 2777, which points to a problem involving the inhibit switch. The inhibit switch will not allow me to do a forced regen, so I have utilize Insite to complete the task. Insite says something about ecm programming for the inhibit switch, yet I had ecm flashed to the correct av10046. I'm thinking maybe I have a bad inhibit switch on the dash, since I can not do a forced regen when pressing the rocker switch.
Thx in advance