+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: CAT, Detroit, and Other engine related Help... (/forumdisplay.php?fid=72)
+--- Thread: Detroit DDEC-V stalling and misfiring (/showthread.php?tid=5658)
RE: Detroit DDEC-V stalling and misfiring - Peashooter67 - 04-07-2020
This is also what happens when your bull gear goes out.
RE: Detroit DDEC-V stalling and misfiring - HotRod - 04-07-2020
(04-07-2020 )Peashooter67 Wrote: This is also what happens when your bull gear goes out.
It is the same thing that happens when the bull gear goes out, but the ddec V engines have a completely different bill gear with straight cut gears. You do not usually see them fail. The air compressor has been known for snapping, I have also seen quite a few fuel pumps snap as well. There has been quite a few Detroit's that I could not get to fire off ether. Definitely not the first time I heard of a cold Detroit not running on either
RE: Detroit DDEC-V stalling and misfiring - hhow55 - 04-07-2020
I had a shaft snap on a accessory drive. It was a N14 celect plus 2000 year[/align]