+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: Ask Your question... (/forumdisplay.php?fid=45)
+--- Thread: 2003 volvo isx15 cm570 issues (/showthread.php?tid=9244)
RE: 2003 volvo isx15 cm570 issues - Magnat1976 - 12-05-2024
Hi Rowze,what your thoughts about my engine compression readings and Difference?
RE: 2003 volvo isx15 cm570 issues - tree98 - 12-05-2024
.....erased.......
RE: 2003 volvo isx15 cm570 issues - Magnat1976 - 12-06-2024
(12-05-2024 )tree98 Wrote: .....erased.......
What erased?
RE: 2003 volvo isx15 cm570 issues - Magnat1976 - 12-06-2024
Hello,please advise asap..
We did mechanical compression test..
Cylinder#1-500
#2-520
#3-580
#4-600
#5-570
#6-580
Difference between #1 and #4 is 20%
Is it out of tolerance, critical?I have blow by,not huge,almost no oil consumption.
This can cause stumbling, surge,loss of power,and very bad vibration on road speed at 65mp.1500rpm..
RE: 2003 volvo isx15 cm570 issues - Rawze - 12-06-2024
(12-05-2024 )Magnat1976 Wrote: Hi Rowze,what your thoughts about my engine compression readings and Difference?
not sure,.. never had to deal with that before. L:ike your first post ststes.. it has 830k+ miles on it.
does it have after-market parts or head in it?.
If its still running good, its time for rods/mains. Look at wear on everything while its apart for this.
RE: 2003 volvo isx15 cm570 issues - Magnat1976 - 12-06-2024
All cummins parts,overhauled at cummins at 536k miles