+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: Ask Your question... (/forumdisplay.php?fid=45)
+--- Thread: 1958 chevy (/showthread.php?tid=10086)
1958 chevy - thxtnmn - 04-24-2025
I purchased a 2010 Thomas school bus with a 6.7 cummins. I have a heavy duty 1958 chevy body I'm putting on the school bus chassis. This is my first time really messing with a 6.7 and I want to remove some items and may need some info on the programing part. I do have access to Insite and calterm. Any help or ideas would be appreciated.
RE: 1958 chevy - Rawze - 04-25-2025
(04-24-2025 )thxtnmn Wrote: I purchased a 2010 Thomas school bus with a 6.7 cummins. I have a heavy duty 1958 chevy body I'm putting on the school bus chassis. This is my first time really messing with a 6.7 and I want to remove some items and may need some info on the programing part. I do have access to Insite and calterm. Any help or ideas would be appreciated.
What is the engine ser# (the ESN number)?.
and as far as I know ... LEGALLY,.. all the emissions system, ABS module, and all the other more modern features will NEED TO STAY, as it would still be considered a 2010 vehicle, for legal and road safety reasons.
RE: 1958 chevy - thxtnmn - 04-25-2025
Esn 73002034 . It's offroad for now. Also curious on ideas on gauges. They sell digital gauges for the truck that fit the dash but I'm not sure if I could make those work. Just kicking ideas around in my head and trying to get some info from people a little more familiar with what I'm doing.