Rawze.com: Rawze's ISX Technical Discussion and more
Cylinder Head Combustion Face Cracking - Printable Version

+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: ISX Related Help (/forumdisplay.php?fid=68)
+--- Thread: Cylinder Head Combustion Face Cracking (/showthread.php?tid=1013)



Cylinder Head Combustion Face Cracking - Zapicles - 10-14-2016

Just Found this alert, wanted to share


RE: Cylinder Head Combustion Face Cracking - Rawze - 10-14-2016

Thanks for the bulliten posting.

This problem has been around forever,.. but most of the heads I have seen myself actually crack like this were the result of a bad delete. The Big-name deletes, and all the smaller companies that copy their bad methods are notorious for this type of head cracking even at lower HP ratings.

More on bad deletes...
http://rawze.com/forums/showthread.php?tid=729&pid=5901#pid5901


RE: Cylinder Head Combustion Face Cracking - Signature620 - 10-14-2016

I've seen this type of crack countless times on engines in their standard factory form. There has to be some other explanation for it, perhaps the constant high coolant temps, perhaps the casting around the injector bore needs to be thicker, who knows....


RE: Cylinder Head Combustion Face Cracking - AussieISX - 10-14-2016

They crack like that in this country whether they have a mm tune or completely stock . Some do it before they have done 400,000 km so not very many miles


RE: Cylinder Head Combustion Face Cracking - Running rough - 10-14-2016

My theory on it is constant high torque combined with high water temps and high ambient temps takes its toll on these engines, the head is without a doubt the weakest link in these engines in my opinion


RE: Cylinder Head Combustion Face Cracking - Rig Wrench - 10-14-2016

This problem isn't just limited to isx. Most cats I pull down are like that on at least a couple cylinders. Thousands of heat cycles combined with high cylinder pressures and less than perfect injector flows, something has to give


RE: Cylinder Head Combustion Face Cracking - Rawze - 10-15-2016

Very Interesting theories.

Basic Magnaflux...