+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: Things that may help others... (/forumdisplay.php?fid=46)
+--- Thread: Design change woes-differential episode. (/showthread.php?tid=10636)
Design change woes-differential episode. - Mrkentee - Yesterday
Cursed be manufacturers and their cost cutting schemes.
The old differential was fully rounded on the side. This new one has some metal cut off, and it’s a straight edge for that little section.
Well, guess what. My sealer didn’t quite cover it with that in mind, and I now have a drip. Which means it has to come out again, be cleaned up and resealed. If I did this regularly I might have noticed.
Love it!
RE: Design change woes-differential episode. - Rawze - Yesterday
Somehow, that does not surprise me.
What I re-did my own rear ends, I had to machine a set of custom input shaft yokes on my lathe, as mine were no longer available.