![]() |
| N14 Injector Solenoid Failure - Printable Version +- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums) +-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1) +--- Forum: Ask Your question... (/forumdisplay.php?fid=45) +--- Thread: N14 Injector Solenoid Failure (/showthread.php?tid=10818) |
N14 Injector Solenoid Failure - mechanixrds - Today Has anyone else come across this issue on a N14 Celect Plus? What's happening is that it keeps breaking the internal plunger on the solenoids and will cause an over fueling condition. It is always #4 injector. I've attached some pictures so you guys can see what I'm talking about. [attachment=10584] [attachment=10585] I've checked cam, cam followers, push tubes, rocker arms and shaft, ohmed out harness and load tested it, pass-through as well, and ecm. Any suggestions guys? RE: N14 Injector Solenoid Failure - Rawze - Today N14 should be in a museum by now... I hope like h#ell your not trying to haul freight with an old N14... you need to get rid of it and buy something 25+ years newer at this point. DO NOT EXPECT any injectors or other parts to be worth 3 cents on those old antique engines these days.. You could buy 5000 injectors and maybe get 3 that last for more than 1-2 years.. that is how old and out of date and how little there is for reman for them any more... they are a dinosaur of the past. RE: N14 Injector Solenoid Failure - mechanixrds - Today It is a customer's truck. I don't drive them. I just fix them. |