+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: Ask Your question... (/forumdisplay.php?fid=45)
+--- Thread: Electrical Fault-ABS Module (/showthread.php?tid=1167)
Electrical Fault-ABS Module - CFR__AND_SONS - 11-29-2016
Hay all, Last week my truck was acting up. I was backing in to a low trailer so I dumped the suspension and as I was backing up, the truck shut off and threw a "Electrical Fault" flashing on the info screen followed by a "ABS Module*"
The only thing I did different since I bought this truck is I had the heater running for a while. Not sure if it related but I mention it because after about 20 mins of just sitting with the truck off (it wouldn't start anyways) I cranked it and it turned on as normal and operated as normal. It hasn't given me any more issues since.
Any ideas?
RE: Electrical Fault-ABS Module - Rawze - 11-29-2016
A good inspection of all the wiring where it crosses or touches the frame would be a good place to start.
RE: Electrical Fault-ABS Module - rgreen - 12-01-2016
If it is a prostar it has a airbag sensor, I would check that, I had to replace mine, look on the left side of rear of the truck by the airbag you should senors that plum into airbag fitting