Rawze.com: Rawze's ISX Technical Discussion and more
Anything can happen....take a look - Printable Version

+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: Things that may help others... (/forumdisplay.php?fid=46)
+--- Thread: Anything can happen....take a look (/showthread.php?tid=125)

Pages: 1 2


RE: Anything can happen....take a look - Hammerhead - 06-20-2016

Sorry for the thread derailment OP, that broken wrist pin, pulled down just in time is awesome! It's always good to hear when someone gets saved in the nick of time!

Good info Wiseman, thanks for the feedback. Volume was my intended meaning of air speed, high air flow with shorter combustion cycles...we're on the same page.
As for need of a CM870 with CPL8518 with a HX60...that would be nice, but I got what got...a CM871 CPL2919 with a HX55.
I believe my VG ring is messed up and I'm prepared/planning on turbo replacement shortly, if one of those gentleman would suggest a different turbo, I'm open to suggestions as the one I'm currently running (4309078RX) has been quoted at $4200. If there is a better choice for my application that would cost less than that, I'm all ears.