+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: ISX Related Help (/forumdisplay.php?fid=68)
+--- Thread: Is there any other way to check injectors (/showthread.php?tid=1550)
Is there any other way to check injectors - gatow900 - 03-07-2017
I have done the bubble test and ran the truck on one cylinder at a times and no luck. I jet a miss at idle here and there and under load I does the same. Any help I'm losing my mind over this.
RE: Is there any other way to check injectors - Rawze - 03-07-2017
let it sit overnight, pull the valve cover and crank it up. Look at it with a thermal camera and see what injector(s) are colder than the rest as it starts to warm up?
just some thoughts on it.
RE: Is there any other way to check injectors - gatow900 - 03-07-2017
Don't have thermostat cam. Just thermogun may be that would work. Or just do old school and take exhaust manifold off and see witch on misses.
RE: Is there any other way to check injectors - gearhead - 03-11-2017
thermo gun will work check and see what you get right after start up.
RE: Is there any other way to check injectors - Mr Hagg - 03-11-2017
I think maybe more along the line of actuators, how old are they?
RE: Is there any other way to check injectors - Jonarcisse - 04-11-2017
(03-11-2017 )Mr Hagg Wrote: I think maybe more along the line of actuators, how old are they?
Good evening Mr. Hagg whats the name and number for your shop
RE: Is there any other way to check injectors - gatow900 - 04-12-2017
So I did check for temp with thermo gun no big difference. So I took all off them out and one had half of the hole on the tip clogged. I had a spare one replaced it and everything is go. Sorry for late up date and than thanks for your help