+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: ISX Related Help (/forumdisplay.php?fid=68)
+--- Thread: @m*m^2 on ISX15 CM2250 (/showthread.php?tid=1820)
Pages: 1 2
@m*m^2 on ISX15 CM2250 - zyNoT - 06-08-2017
solved.
RE: @m*m^2 on ISX15 CM2250 - Hammerhead - 06-08-2017
(06-08-2017 )zyNoT Wrote: Main question, will it work? And by work I mean by using just the overlay and doc.
My guess is it will take care of EGR, DPF. But what about SCR/DEF?
I don't know which overlay you have, but the commonly available version found on the web is for the CM871 ONLY!
So unless you've been shared a CM2250 specific version, NO!
Contact Gearhead, Mr Hagg, Rawze, or Unilevers directly to be certain.
RE: @m*m^2 on ISX15 CM2250 - Unilevers - 06-08-2017
completely different animals, will not even come close to working.
RE: @m*m^2 on ISX15 CM2250 - zyNoT - 06-08-2017
solved.
RE: @m*m^2 on ISX15 CM2250 - Hammerhead - 06-08-2017
(06-08-2017 )zyNoT Wrote: I figured just wanted to make sure. If anyone knows how to complete a del on a ISX15 CM2250 let me know. Constant regens are causing problems.
You quoted one of the guys I told you to contact, send him a PM. You are in very capable hands with Uni.
RE: @m*m^2 on ISX15 CM2250 - zyNoT - 06-12-2017
solved.
RE: @m*m^2 on ISX15 CM2250 - Cuya - 06-12-2017
(06-12-2017 )zyNoT Wrote: I sent a PM a few days ago and haven't received anything back. If anyone knows how to .. CM2250 let me know.
Set up an appointment to see Mr. Hag down in Atlanta. I got all those problems solved long time ago. worth every mile of the journey and them some.
http://rawze.com/forums/showthread.php?tid=789&pid=9578#pid9578
RE: @m*m^2 on ISX15 CM2250 - bryrob02 - 10-04-2021
Hi all. New to the forum. I've been working on a isx11.9 now for some time that has been very problematic. I've been reading about the @m*m^2 demand ate and was wondering where I could find more information on it. Any help appreciated. Thx
RE: @m*m^2 on ISX15 CM2250 - Rawze - 10-04-2021
(10-04-2021 )bryrob02 Wrote: Hi all. New to the forum. I've been working on a isx11.9 now for some time that has been very problematic. I've been reading about the @m*m^2 demand ate and was wondering where I could find more information on it. Any help appreciated. Thx
What is the engine ESN#? .. the serial number?
My mumble server is also a resource for people to discuss engine tuning too.
http://rawze.com/forums/showthread.php?tid=53&pid=2163#pid2163