LOSSING POWER - Printable Version +- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums) +-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1) +--- Forum: Ask Your question... (/forumdisplay.php?fid=45) +--- Thread: LOSSING POWER (/showthread.php?tid=1857) |
RE: LOSSING POWER - rgreen - 07-01-2017 vgt position is 30% also when driving fuel pressure drops (06-24-2017 )Rawze Wrote:(06-24-2017 )rgreen Wrote: ... RE: LOSSING POWER - Rawze - 07-02-2017 (07-01-2017 )rgreen Wrote: vgt position is 30% also when driving fuel pressure drops I would get that thing over to Gearhead or Mr. Hag down in atlanta and have the truck checked out along with the programming. Not knowing who de-mandated would be of serious concern to me any ways. Who knows what kind of programming it may have in it. RE: LOSSING POWER - Hammerhead - 07-02-2017 (06-25-2017 )Shandro Wrote: If the truck is demandated the doser shouldn't be in use at all. Putting a brand new ones is a waste of money. It's there for looks now if someone opens up the hood. Theoretically yes...but if the doser fuel supply shut off valve failed, then it very well could leak fuel while still showing "Closed" in Insite. RE: LOSSING POWER - Shandro - 07-02-2017 (07-02-2017 )Hammerhead Wrote:(06-25-2017 )Shandro Wrote: If the truck is demandated the doser shouldn't be in use at all. Putting a brand new ones is a waste of money. It's there for looks now if someone opens up the hood. that's is very true it could be leaking by even if position says closed but there must be a cheaper way to block the fuel than by putting a new doser on RE: LOSSING POWER - Nilao - 07-03-2017 Theoretically it can be blocked right at the ISFM port. |