+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: Ask Your question... (/forumdisplay.php?fid=45)
+--- Thread: M ..M .. 2 (/showthread.php?tid=2594)
M ..M .. 2 - JHNDZ - 01-12-2018
Sorry if it's too forward .. but .. I'M Done with fighting the emissions ..
Can anyone please help . .
I need this tune.. Is there anyone In socal ..
L A area please .. pm me
Thank you
RE: M ..M .. 2 - MageRoyal - 01-12-2018
Try PM Unilevers or MommaBurt
RE: M ..M .. 2 - Rawze - 01-12-2018
A "not for hire" sign on it, few hundred bucks in fuel, and a visit to Mr. Hags to get it straightened out once in for all. Even after the fuel, it is still cheaper than 99% of places out there, and he specializes in making it pass all tests for the guys who live out that way.
RE: M ..M .. 2 - JHNDZ - 01-22-2018
If I were to get one of these "tunes " ..
What are good signs of a good demandate..
What should my egt be at ? ..
Mpg ??
I have a cm2250 .. isx15 ..
How big should that hole be in the dpf?
RE: M ..M .. 2 - Mr Hagg - 01-22-2018
if you lived in a country that its ok you need dpf completely cleaned all cans and scr.
EGT should run like 4-7 then on hard pull go around 7-8.5 or so. boost not to exceed 36 ish for 2250.
RE: M ..M .. 2 - Mikiisx09 - 01-23-2018
Last week I send friend of mine from FL to Mr.Hagg.Highly recommended!!!!
RE: M ..M .. 2 - Jon Mastin - 01-26-2018
Going on 300k trouble free miles and getting ready to demandate another. Mr Hagg knows his stuff.