+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: ISX Related Help (/forumdisplay.php?fid=68)
+--- Thread: Bad idle and strange noise after wiring harness repaired (/showthread.php?tid=2760)
Bad idle and strange noise after wiring harness repaired - alborz - 02-13-2018
First I had code for shortness to high or low voltage source
So I removed the engine wire harness and found a few spots with corrosion. I fixed the and put the harness back on engine,
meanwhile I took the egr valve off and cleaned it along the pipe and sensors. Now there is stange noise from engine like rocking back and forth
If I rev it up a little the noise goes away but returns.
Here what I did
I unpluged the egr temp sensor then plugged it to another that I had
Unplugged the differential sensor and plugged to another differential sensor
Same thing for I- Map sensor
No change in the noisy engine
Engine is ISX 871
Any comments will be greatly appreciated [/b]
RE: Bad idle and strange noise after wiring harness repaired - the missing link - 02-14-2018
Almost sounds like egr , try taking the magic plug off ....
That about all my knowledge , if you had to find it all , it won't take long ,lol
RE: Bad idle and strange noise after wiring harness repaired - smorgan87 - 02-14-2018
Could be egr, could be injectors, could be actuators... Any codes after fixing the harness?