+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: ISX Related Help (/forumdisplay.php?fid=68)
+--- Thread: Finally bringing Prostar home to fix.... (/showthread.php?tid=2969)
RE: Finally bringing Prostar home to fix.... - Brock - 04-30-2018
For the 2nd time SOLVED!
https://youtu.be/WhH5a7pgpMk
To the electronic repair store we go! No way I'm paying $2300 CAD for a new ecm for this.
On a side note, Rawze called it back in August lol
RE: Finally bringing Prostar home to fix.... - kryten - 04-30-2018
The story of "$2.00 to tap with hammer, $9998.00 for knowing where to tap with hammer" comes to mind.
RE: Finally bringing Prostar home to fix.... - 74bassman - 04-30-2018
Was this your problem?? And how did you fix it?
RE: Finally bringing Prostar home to fix.... - Waterloo - 04-30-2018
I’m going on ten years with my ECM, going to call and see about a new one, before new are no longer available.
RE: Finally bringing Prostar home to fix.... - Brock - 04-30-2018
It was my problem yes. I brought it to a electronic repair shop that charged $10 to solder it back, they said the resistor was fine.
Waterloo, when I asked only reman were available.
RE: Finally bringing Prostar home to fix.... - snailexpress - 05-01-2018
(04-30-2018 )Brock Wrote: It was my problem yes. I brought it to a electronic repair shop that charged $10 to solder it back, they said the resistor was fine.Great job Brock! Imagine how much money stealership will charge for something like you have:anger:
Waterloo, when I asked only reman were available.
RE: Finally bringing Prostar home to fix.... - Waterloo - 05-01-2018
(04-30-2018 )Brock Wrote: It was my problem yes. I brought it to a electronic repair shop that charged $10 to solder it back, they said the resistor was fine.
Waterloo, when I asked only reman were available.
I checked Quickserve the other day, new ones in the pipeline. xxxxxxxNX
RE: Finally bringing Prostar home to fix.... - 74bassman - 05-01-2018
Thanks. Have you run the truck yet?
RE: Finally bringing Prostar home to fix.... - Brock - 05-01-2018
(05-01-2018 )74bassman Wrote: Thanks. Have you run the truck yet?Yeah I drove it all day yesterday doing loads and it was good buy currently I am on the side of the road waiting for my wife to bring me a new ecm.........
Damage must have already been done. Once it got real hot pulling a big hill, it shi#t the bed again.