+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: Your Daily Blog (/forumdisplay.php?fid=77)
+--- Thread: Rawze's Daily blog... (/showthread.php?tid=340)
RE: Rawze's Daily blog... - Rawze - 04-01-2019
(04-01-2019 )TruckerNick Wrote: This is what's on my truck
I would have replaced that with a davco right away if it were mine.
RE: Rawze's Daily blog... - Rawze - 04-16-2019
forum member 'Parttime' stopped by couple days ago. He made a video for his youtube channel about it. Here is that video...
RE: Rawze's Daily blog... - Lonestar10 - 04-16-2019
I thought Sammy was on here. All hail the Arduino god
RE: Rawze's Daily blog... - ynot - 04-16-2019
(04-16-2019 )Rawze Wrote: forum member 'Parttime' stopped by couple days ago. He made a video for his youtube channel about it. Here is that video...
No way!! I literally started looking into using an arduino too controlled the VGT 2 nights ago, an this pops up ha insane.
My project is a bit different then yours an I've got my work cut out, since i haven't touched any coding in 20years an even back then it was amateur hour at best lol, then there's the learning bout pgn an spn an hex. I've got my work cut out for me but at least I know what I'm looking too do can be done.
RE: Rawze's Daily blog... - Rawze - 04-16-2019
(04-16-2019 )ynot Wrote: My project is a bit different then yours an I've got my work cut out, since i haven't touched any coding in 20years an even back then it was amateur hour at best lol, then there's the learning bout pgn an spn an hex. I've got my work cut out for me but at least I know what I'm looking too do can be done.
then you will have to plan a weeks visit down at my place lol.
RE: Rawze's Daily blog... - ynot - 04-17-2019
I'm always looking for a vacation spot, I've talked bout going down there for years even back when we used too chat on mumble you still use that?
Have too get this beast cleaned first she's an embarrassing mess right now, an a full wallet lol
RE: Rawze's Daily blog... - Rawze - 05-02-2019
I set up an amazon page with the stuff I use, like, or mention on here for what its worth. Maybe others will find it helpful when searching for stuff related to what we talk about on the forum. There is also a link at top of page.
Not trying to push/sell s#it off onto others, just though it may be convenient, was suggested by a couple forum members.
Rawze's amazon Page
RE: Rawze's Daily blog... - Rawze - 05-14-2019
For those who have been asking me to make a video series on programming the arduino and learning c++ ... Maybe it will help those who are interested in this kind of stuff.
For the rest,.. just a warning,.. this series will seriously cure insomnia .. it even put me to sleep - LOL.
https://www.youtube.com/watch?v=olpIWDYKW00&list=PLKyYV_KjhXUQDpWn3070OFLeNfywZfRYM
RE: Rawze's Daily blog... - Rawze - 10-12-2019
as of (10-12-2019)...
* Fuelled in Chattanooga, TN.
* Took 12,000 lb load to lexington, KY.
* 90 miles away, picked up a heavy wire load, scale ticket says 78,726 lb.
* Delivered it in Carrollton, GA., then fuel again.
Fuel mileage to the pump was 8.598 mpg.