+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: Ask Your question... (/forumdisplay.php?fid=45)
+--- Thread: Insite 8.2.0 (/showthread.php?tid=3493)
Insite 8.2.0 - wingover - 09-05-2018
Hello All,
I am stuck in the middle of nowhere with an ISM 500 (2008) that runs rough and vibrations when accelerating until RPM is above 1300. It run smooth above that.
I ordered the Cummins Insite from {name removed} and installed it, however, the instructions say to download a file to generate a serial number and send it to them for a registration code. The link to the file on their website is not working and the guys there not really responding.
Anyone has this file to share, or any idea how to activate the software so I can start working on the engine?
Thanks.
RE: Insite 8.2.0 - Rawze - 09-05-2018
Filesharing, keygens, activations, unlock programs and the like are not allowed on this forum. Get with the vendor who sold you the software.
RE: Insite 8.2.0 - wingover - 09-05-2018
Thanks for the reply. By no mean, I am not asking for anything illegal. Just asking if others encountered the same issue with the vendor.