+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: ISX Related Help (/forumdisplay.php?fid=68)
+--- Thread: Cm2250 isx fuel pump (/showthread.php?tid=3794)
Cm2250 isx fuel pump - Yairo2 - 11-26-2018
I want to know if I can put in a fuel pump of a cummins isx15 2250 the head of two pintones the one that brings my cm2250 is 3 pistons just change the head
RE: Cm2250 isx fuel pump - flatbed94kid - 11-26-2018
Are you saying your fuel pump on your 2250 has 2 cylinders and you want to put a head on it with 3 cylinders?
RE: Cm2250 isx fuel pump - Yairo2 - 11-26-2018
my pump has 3 pistons because it has 6 screws and I want to put a 2 piston head
RE: Cm2250 isx fuel pump - flatbed94kid - 11-26-2018
I'm not sure if your able to do that. My 2250 has 4 bolts on the head. It has 2 cylinders. You have 6 bolts right? So why not use the same? Go to Quickserve.com and register your s/n of your engine for free literature and diagrams. They have a video on how to do it there as well. Make sure your camshaft of your fuel pump isnt bad as well while your in there
RE: Cm2250 isx fuel pump - imalumberjack - 11-26-2018
negative on just changing head in order to go from 3 plunger down to two, completely two different animals. If you change to the 2 plunger style I believe you need to change fuel lines also.
RE: Cm2250 isx fuel pump - Yairo2 - 11-26-2018
ok thank you I'll do everything and I'll answer what I did
RE: Cm2250 isx fuel pump - redbeard - 11-29-2018
Use the Search function on this site. I remember multiple post about this very issue. Some even had all the part numbers required. Good luck