+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: ISX Related Help (/forumdisplay.php?fid=68)
+--- Thread: Upping power (/showthread.php?tid=4198)
Upping power - JMBT - 02-25-2019
So I have a CM2250, factory 500hp ST. I know I will be needing an inframe relatively soon and as my average loads have gotten much heavier then they were when I had the truck built in 2011, I am interested in changing the internals to accommodate a higher HP tune. Maybe 550-600 nothing crazy.
When the time comes I will most likely be doing the inframe myself so I am trying to gather as much info as possible before then.
So my questions:
How do I find out if my block, etc. would be compatible with the higher HP?
Where would I go about finding a CPL of which parts would need to be changed?
How would I locate part #’s for an upgrade, as my QS account and engine VIN won’t be of any help.
Thanks in advance for all your ideas and suggestions
RE: Upping power - Rawze - 02-25-2019
http://rawze.com/forums/showthread.php?tid=4173&pid=35525#pid35525