+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: Ask Your question... (/forumdisplay.php?fid=45)
+--- Thread: Replacing the air control valve - any software calibration needed? (/showthread.php?tid=4459)
Replacing the air control valve - any software calibration needed? - jeff_cm870_vnl - 04-25-2019
Hello,
[attachment=4948]
My air control valve (p/n 3597619) is leaking and I ordered a new one online. It arrived and was going to replace it but then started wondering if any software calibration is required when replacing this part. Can I just swap this thing out and be done or do I need to wait until I have access to Insight to do some sort of calibration?
Thanks
Jeff
RE: Replacing the air control valve - any software calibration needed? - marek4792 - 04-25-2019
No software calibration required it's all plug and play.