+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: Your Daily Blog (/forumdisplay.php?fid=77)
+--- Thread: Teaching 74bassman how to do an inframe (/showthread.php?tid=4606)
RE: Teaching 74bassman how to do an inframe - Waterloo - 05-31-2019
(05-30-2019 )tree98 Wrote: Hey Waterloo, didn't you forget to order the green loctite and had to wait 2 or 3 days for it to come? Or were you just ordering stuff so you could check out the mail girl? I can't remember. ;)
Well... The mail girl was very hot, the little blonde... Talk about turning my crankshaft, Yowza! But, I ordered the wrong stuff, I think I pulled the trigger on Loc-Site 608 instead of my intended 609...
It happens, Rawze found some at McMasters, I ordered and we had it the next day... The UPS guy delivered that, he ain't quite the hot little blond. Nice guy, but he did nothing for me. ;-)
RE: Teaching 74bassman how to do an inframe - flatbed94kid - 05-31-2019
I'm curious how that crane works?
RE: Teaching 74bassman how to do an inframe - Waterloo - 05-31-2019
(05-31-2019 )TruckerNick Wrote: I'm curious how that crane works?
Push the crane into place, plug in the winch located in the base of the leg and watch it do its magic. It is actually pretty cool.
RE: Teaching 74bassman how to do an inframe - Rawze - 05-31-2019
(05-31-2019 )Waterloo Wrote:(05-31-2019 )TruckerNick Wrote: I'm curious how that crane works?
Push the crane into place, plug in the winch located in the base of the leg and watch it do its magic. It is actually pretty cool.
that damn crane is fantastic for pulling enigne's and heads, to rears, to about everything. I use it to load my riding mower into the back of my pick-up, for heavy deliveries of equipment and appliances, just about everything. -- I think every house should come with one. Ranks right up there with having a handy-mans hammer and screw-driver. lol
RE: Teaching 74bassman how to do an inframe - Chamberpains - 05-31-2019
Handyman's hammer???
[attachment=5091]
Or...
[attachment=5090]
RE: Teaching 74bassman how to do an inframe - dhirocz - 05-31-2019
Id love to watch you do the counterbores. Unfortunately im stuck in Savannah playing GI Joe for the next couple weeks.
Rawze, have you had to pull the front housing to reseal it during any of these inframes? I know that crank hub is a pain...Ive seen on the internet one guy who had a tool to remove his with a hydraulic ram, but cannot find much of any information at all out there on this.
Anyway, rock on!
RE: Teaching 74bassman how to do an inframe - dhirocz - 05-31-2019
Waterloo...I dont believe you *cough* need, um, pictures of this mail girl to confirm this. Yeah... Lol
RE: Teaching 74bassman how to do an inframe - smorgan87 - 05-31-2019
So lemme get this straight. Theres good food, lots of beer and a hot mail girl at Rawze's? I need to book a load to GA, i bet bassman could use a hand or at least another supervisor.
RE: Teaching 74bassman how to do an inframe - Nilao - 05-31-2019
I'll be in Crawford, Georgia on Monday...maybe they need a couple of extra hands to help with the beer. Lol