+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: ISX Related Help (/forumdisplay.php?fid=68)
+--- Thread: EGR / DPF DE-MANDATE (/showthread.php?tid=4880)
RE: EGR / DPF DE-MANDATE - Lonestar10 - 08-01-2019
theres a chance it cant crack out and fall down and at very worst plug the section after the can where goes back down to 4-5inch.. but so far no troubles and i do beleive a few people have it that way. i think a week ago or so someone posted that they discovered a problem they were chasing was a piece broke and caused a plug.
RE: EGR / DPF DE-MANDATE - Rawze - 08-02-2019
(08-01-2019 )Mattman Wrote:(08-01-2019 )Lonestar10 Wrote: <=====95% clean cans left around 2inches or so on outerwall to act as a muffler. those thousands in parts cost me more than their worth and i felt like a god smashing that PoS to smitherines.
I can understand your frustrations.
Any troubles with the little left around the wall of the can breaking off later down the road? I haven't seen one busted up to tell how well the remainder would stay stuck to the walls.
i have seen a few times, they do fall apart and clog up.
If a person is going to open them up,.. I would say they would be much better off leaving nothing behind that can fall apart later,. than to worry about a slight difference in sound.