+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: Ask Your question... (/forumdisplay.php?fid=45)
+--- Thread: Thermisisters (/showthread.php?tid=5068)
Thermisisters - Lonestar10 - 09-15-2019
Im guessing the HVAC fault in this picture is for thermisistors? i have the kit and new dryer sitting at home at the local international dealer waiting for me just want to make sure i dont need anything else. would have had them installed friday but got greedy took a load to south of dallas tx and woopsy mighta been a mistake lol. AC would just have issues now and then boot up diamond logic turn AC compressor back on manually close DL and would work for a few hours.
now damn thing wont run more than 5 minutes without DL hooked up so now ive got it running manually ignoring the thermisister running the AC because my APU even with all its new parts has been unable to keep up sitting here in the sun.
RE: Thermisisters - smorgan87 - 09-15-2019
I discovered the other day intl did away with thermisters. Just a high psi sensor and low psi sensor.
RE: Thermisisters - Lonestar10 - 09-15-2019
gota have some way to make sure evap doesnt freeze over.
RE: Thermisisters - smorgan87 - 09-16-2019
Thats the purpose of a low psi switch.