+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: Ask Your question... (/forumdisplay.php?fid=45)
+--- Thread: Mandate (/showthread.php?tid=5139)
Mandate - Milo22 - 10-03-2019
Hello All,
I am in the Portland Or. area and have a few trucks I would like to remove the mandate on. I have contacted Gearheads shop and Unilevers by PM and have not gotten a response. I have used another vendor out west that did a couple trucks already, but after reading the forums hear I am wanting to make sure its done right to avoid future problems. A couple MX13, and DD15/DD13.
Thanks
RE: Mandate - marek4792 - 10-03-2019
(10-03-2019 )Milo22 Wrote: Hello All,Try mommaburt he works with Uni they are very busy at times
I am in the Portland Or. area and have a few trucks I would like to remove the mandate on. I have contacted Gearheads shop and Unilevers by PM and have not gotten a response. I have used another vendor out west that did a couple trucks already, but after reading the forums hear I am wanting to make sure its done right to avoid future problems. A couple MX13, and DD15/DD13.
Thanks
RE: Mandate - Milo22 - 10-04-2019
I pm them both a couple days a go, hope to hear back soon.