+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: ISX Related Help (/forumdisplay.php?fid=68)
+--- Thread: Aftertreatment History (/showthread.php?tid=5300)
Aftertreatment History - Golfnut - 11-11-2019
I'll apologize in advance for making too many threads but I like to keep separate threads for issues/questions. I got Insite installed today and connected to my truck. Its a 2014 Kenworth T680 with an ISX450. CM2350. I haven't done a forced regen yet as its 15 degrees outside and I don't want to open the shop doors up! I did find the aftertreatment History in Insite and think that I'm encouraged by the results I'm finding, especially the last one that would have been done after I replaced my IMAP and DeltaP sensors. The Intake and Outlet Temps are 1049 and 1021 with a differential pressure of .5 inHg. Also, it appears that its running regens every 100-115 hours with the exception of one outlier where it appears the truck was not warmed up.