Cheapest place for 871 turbo??? - Printable Version +- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums) +-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1) +--- Forum: Ask Your question... (/forumdisplay.php?fid=45) +--- Thread: Cheapest place for 871 turbo??? (/showthread.php?tid=569) |
Cheapest place for 871 turbo??? - Bmyetrkg24 - 07-01-2016 Help I'm new to this forum but been in trucking 26 years rawze videos are awesome so I signed up here My question to u all is does anyone know the cheapest place I can buy a new or reman turbo for my 871 isx peyerbilt in Wichita KS wants like 3200!!!!! Found one on ebay for 2200 but on a rawze video the guy said he spent 900 for turbo and 2-300 for the acuator I wish I could find one that cheap! Thanks for your help ahead of time RE: Cheapest place for 871 turbo??? - in2trux - 07-01-2016 $3200 is an average price, $700 on the actuator. Buyer beware, lots of counterfeit parts out there priced close enough to OEM to look like a good deal. You don't always get what you pay for! RE: Cheapest place for 871 turbo??? - Hammerhead - 07-01-2016 (07-01-2016 )Bmyetrkg24 Wrote: Help I'm new to this forum but been in trucking 26 years rawze videos are awesome so I signed up hereDo you have a part number for your turbo for proper price comparison? If you haven't signed up for a quickserve.cummins.com account yet, I'd suggest you do, then you can look up part numbers for yourself which makes phoning around for comparison a lot quicker & easier. My CM871 CPL2919 calls for turbo part # 4309078(RX/NX). The RX is reman, NX is new. My quoted price for this turbo at KW in Edmonton, AB Canada is CDN$4159.71. Based on the current approx 25% exchange rate that's basically the same. RE: Cheapest place for 871 turbo??? - Bmyetrkg24 - 07-01-2016 Thanks for the info fellas yah 3200 is what I'm getting on average my part # is 4309077rx and good call on the Cummins quick serve I need to sign up RE: Cheapest place for 871 turbo??? - Rawze - 07-01-2016 $3200 sounds about right to me. I care deeply about the uptime of my truck, and what quality of component goes onto my engine. Whatever is going to give me the best uptime vs cost is what I choose. That is how we make our living out here,.. and not by trying to skimp a few dollars, then being down again because of bad decisions. A turbo is one of those components that will damn sure put you on the side of the road with thousands in towing bills, or worse yet,.... engine runaway. --- DONT GO CHEAP IF YOU CARE ABOUT WHAT YOU DO!. RE: Cheapest place for 871 turbo??? - Bmyetrkg24 - 07-02-2016 Right on Mr. RAWZE appreciate your input the one at peterbilt is a new Cummins part for 3210 so that's what we're going with |