+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: Ask Your question... (/forumdisplay.php?fid=45)
+--- Thread: engine assembly lube (/showthread.php?tid=5991)
Pages: 1 2
engine assembly lube - JMBT - 03-22-2020
It looks like amazons wait time on permatex 81950 (engine assembly lube) is too long, what other engine assembly lube do you guys use?? Lubriplate 105 also has a long wait time, but I can get Sta-Lube 3331 xtreme on two day prime...? Any experience with the Sta-Lube??
RE: engine assembly lube - tree98 - 03-22-2020
Walmart.com has ultra slick for 5.99 and free shipping, Says I could have it between Wednesday and Monday.
RE: engine assembly lube - JMBT - 03-22-2020
Thanks Tree98, I was looking on amazon, $5.99 also but delivery was into April! I had totally forgotten about Walmart.com. I’ll check it out.
RE: engine assembly lube - Lonestar10 - 03-22-2020
also could check your local auto parts stores might pay a bit more but its already there.
RE: engine assembly lube - Pd6cas2 - 03-23-2020
I’ve seen ultra slick at Freightliner Converse, Tx !
Hopefully Your close by.
RE: engine assembly lube - redbeard - 03-23-2020
Stp oil treatment was my standard for years, never an issue
RE: engine assembly lube - Chamberpains - 03-23-2020
I've seen permatex engine lube at autozone, napa and all other big chain stores. They are still open in most shutdown states.
RE: engine assembly lube - Waterloo - 03-23-2020
Check the auto parts store, I think we found it at Auto Zone, Slick Lube. Works like a champ, nice and sticky, made installing the lower end bearings a breeze.
RE: engine assembly lube - Rawze - 03-23-2020
ultra-slick assy. lube is typically my first choice. It is at a lot of places.
Vasoline petrolium jelly is also not a bad choice. I sometimes use this, especially if the engine is going to sit a while before being cranked that first time. I will not however use it in really hot (90+F) weather.