+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: Ask Your question... (/forumdisplay.php?fid=45)
+--- Thread: ISX wont start (/showthread.php?tid=6462)
ISX wont start - AdoMartin - 08-04-2020
Hi Guys,
Newbie here. I've got a problem with one of my trucks- a 2008 pete 379 with an ISX CM871 engine. The truck was left sitting for more than a month and it wont start now but cranks really good.
We tried checking and changing the fuel pump, put pressure on the tank, check all the fuses and check the timing but, unfortunately, still wont start.
Anything I missed checking?
Thanks
RE: ISX wont start - tree98 - 08-04-2020
Fuel shut off solenoid?
RE: ISX wont start - AdoMartin - 08-04-2020
I'll check it. Thanks
RE: ISX wont start - Chamberpains - 08-04-2020
Are the fuel filters full?
RE: ISX wont start - Baco74 - 08-04-2020
Check for crank and cam timing sensor
RE: ISX wont start - AdoMartin - 08-04-2020
(08-04-2020 )Chamberpains Wrote: Are the fuel filters full?
I'll try to check. Thanks
RE: ISX wont start - AdoMartin - 08-04-2020
(08-04-2020 )Baco74 Wrote: Check for crank and cam timing sensor
Thanks. I will.
RE: ISX wont start - Rawze - 08-04-2020
when you turn the key on does the electric pump run for 2 minutes?
While the electric pump is running, has anyone bothered to bleed the compu-check port worth at least couple quarts worth of fuel to get all the air out?
lastly,.. in insite,...how many psi while cranking? -- ref: http://rawze.com/forums/showthread.php?tid=989&pid=8423#pid8423