Cm871 hammering, poor thing - Printable Version +- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums) +-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1) +--- Forum: Ask Your question... (/forumdisplay.php?fid=45) +--- Thread: Cm871 hammering, poor thing (/showthread.php?tid=6671) Pages: 1 2 |
RE: Cm871 hammering, poor thing - txfarmer - 10-23-2020 [attachment=7231] RE: Cm871 hammering, poor thing - txfarmer - 10-23-2020 [attachment=7232] RE: Cm871 hammering, poor thing - txfarmer - 10-23-2020 Of course it’s upside down LOL about how my week has gone RE: Cm871 hammering, poor thing - Nilao - 10-23-2020 Well light scoring seems to be the norm. I think all my rollers and lobes have a line or two in them. And they've had them for a few hundred thousand miles. RE: Cm871 hammering, poor thing - marek4792 - 10-24-2020 If it can't be felt with a fingernail it should be good RE: Cm871 hammering, poor thing - txfarmer - 10-24-2020 (10-24-2020 )marek4792 Wrote: If it can't be felt with a fingernail it should be good Thank both of you for your responses. I have spent more time researching wear in the cam and head in general. Going to inspect everything better again. Sounds like I will be okay to just run it. RE: Cm871 hammering, poor thing - txfarmer - 10-31-2020 Happy Halloween everyone. Quick couple questions. I now have calterm, insite, and my inline6. Is there a YouTube tutorial on how to copy and send ecm file to Rawze? Or since I have the {name removed} sent me do I just upload that on my ecm? Is there a site or somebody I can pay to help me understand how to use and what program to use to accomplish this? Thank you RE: Cm871 hammering, poor thing - Rawze - 11-01-2020 (10-31-2020 )txfarmer Wrote: Happy Halloween everyone. if u got CT then you should also have a couple docs on how to pull the file out of your ecm along with all that stuffs. RE: Cm871 hammering, poor thing - txfarmer - 12-04-2020 UPDATE. Sorry it’s been awhile guys. We have it fixed. The dampener fixed 100% of the rattle and hammering issues. Truck is SO much smoother. Mr Price from PA that Rawze recommended did my tuning. Like a new truck, thanks for everyone’s help! |