+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: The Bragging Channel... (/forumdisplay.php?fid=78)
+--- Thread: Pays off to inspect everything (/showthread.php?tid=6913)
Pays off to inspect everything - Neighbor - 01-09-2021
One day after sitting over the weekend go to start my cm870 d-mandated truck, little smoke and a fuel smell, and Tach would bounce while coasting down hills out of gear , so i tested all 4 fuel actuators. 2 of the Metering where at 5 thousands, 2 timing where at almost at 9 thousands out. Go to my nearest Stealer ship they had all 4, open up all the boxes to find out that 3 of the 4 had been returned after signs of being installed. Parts Mgr says that since they are electrical parts you can have them, he couldn't get a credit from cummins because of that !!! I only had to pay for 1, and yes these where oem Cummins remans at $655.00 ea. I have had MR Hagg do injectors already while doing an inframe, i am still waiting on the test tool for the leak down test to come in. Thought i would share, always look at your parts carefully before leaving since everything is so $$$$, and some people are just hacking away at their trucks and profits