+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: ISX Related Help (/forumdisplay.php?fid=68)
+--- Thread: CM871 drag when releasing accelerator (/showthread.php?tid=7928)
CM871 drag when releasing accelerator - RMezaJr - 12-23-2021
When I'm going down the road and I release the accelerator I feel a slight drag, similar to the jakes being on in the lowest setting. The truck has done this since I bought it and never paid much attention to it, but now I'm wondering if there may be a driveline issue, throttle position sensor issue or if this is how all trucks with a VGT turbo act.
Thanks
RE: CM871 drag when releasing accelerator - Rawze - 12-23-2021
Is the drive-line, tranny, or rears getting really hot?.. excess friction in the drive-line causes excess heat buildup.
RE: CM871 drag when releasing accelerator - RMezaJr - 12-24-2021
(12-23-2021 )Rawze Wrote: Is the drive-line, tranny, or rears getting really hot?.. excess friction in the drive-line causes excess heat buildup.
I was told by a friend with the same Year, Make and Model that Volvos tend to hit 210F° often and my truck does as well before the fan clutch engages. Unfortunately, I don't have any temperature gauges in the axles or transmission. Is there an easy way to install them?